IMPACT® Alarm Systems

IMPACT® Digital Alarm System
- LED displays are easy to read
- Available in 3 or 6 module configurations
- View last 10 alarm conditions from the panel
- Vertical LEDs indicate relative pressure
- Remote Monitor Module accepts any eight 4-20ma transducer inputs
- Dual Display Module allows up to 12 gases to be monitored by a single area alarm
- Easy to install
- Upgrade/retrofit versions available
- UL Listed, ULC Approved
- Complies with NFPA99

IMPACT® Alarm System Master Alarm Panels
- Master alarm can monitor up to 60 signals.
- Master alarm can also monitor area alarms through the area alarm dry contact outputs.
- Complies with NFPA99.
- UL listed and ULC approved.
- Primary power design accepts 115 or 220 VAC.
- Remote output contacts standard.
- Communicates with PC-based alarm monitor software. (Software and Interface Module sold separately.)
- Patent pending.

IMPACT® Alarm System Area Alarm Panels
- LEDs on each module indicate normal or abnormal gas line pressure status at a glance.
- Dual display modules available.
- Each area alarm can monitor up to 6 or 12 medical gas and/or vacuum services.
- Local or remote transducer installation (remote only for dual display modules).
- Alarm module calculates high and low alarm settings automatically.
- Primary power design accepts 115 or 230 VAC (50/60 Hz).
- Communicates with PC-based alarm monitor software. (Software and Interface Module sold separately).
- UL listed, ULC approved, NFPA 99 Compliant.
- Patent pending.

IMPACT® Alarm System Local Alarm Panels
- Accommodates any combination of 8-input transducer modules or 10-input switch modules.
- Each transducer module can monitor any combination of pressure, temperature, flow, etc. inputs. 4-digit display cycles through inputs, displaying each reading in turn.
- Primary power design accepts 115 or 230 VAC (50/60 Hz).
- Communicates with PC-based alarm monitor software. (Software and Interface Module sold separately).
- UL listed and ULC approved.
- Patent pending.

IMPACT® Alarm System Combination Alarm Panels
- Great for Level 2 and Level 3 facilities that are not required to have the full complement of individual master and area alarms.
- Complies with NFPA99.
- Can monitor all source equipment and line pressures.
- Use to monitor satellite facilities from a central location.
- Communicates with available PC-based alarm monitor software. (Software and Interface Module sold separately.)
- UL listed and ULC approved.
- Patent pending.

IMPACT® Alarm System Retrofit Alarm Panels
- Retrofit panel will cover almost any existing alarm panel
- Complies with NFPA99.
- Can be used to monitor all source equipment and line pressures.
- Communicates with available PC-based alarm monitor software. (Software and Interface Module sold separately.)
- UL listed and ULC approved.
- Patent pending.

Pressure/Vacuum Alarm Switches & Pressure Gauges
- Normally open or normally closed contacts
- NEMA 4 water -tight housing with mounting brackets
- UL listed instrument quality snap-action switch
- Gas-specific demand check fittings
- NFPA 99 compliant and cleaned for oxygen service